MEXC Fees Explained: Is Spot Trading Really Zero-Fee?

MEXC's spot trading fee schedule lists 0% for maker orders and 0.05% for taker orders, with no minimum 30-day volume required to qualify^††. That beats Binance's flat 0.10% maker and 0.10% taker rate^†† and Bybit's matching 0.10% maker and 0.10% taker schedule^†† — but only for one side of the trade. This guide explains exactly what "zero-fee spot" covers, runs $1,000 and $5,000 examples, and compares MEXC against Binance and Bybit so you know which order type triggers which rate.

DISCLOSURE: CompareCEX may earn a commission when you sign up through our links. This does not influence our editorial scores.

RISK: Crypto assets are volatile and unregulated in many jurisdictions. Not financial advice.

What Are MEXC's Actual Spot Trading Fees?

MEXC's regular tier, which every new account starts on, charges 0% maker and 0.05% taker on spot trades^††. There is no 30-day volume threshold to reach this rate — it applies from the moment you open an account, according to MEXC's own fee schedule.

All three exchanges require KYC verification before you can trade^†††, so none of them let you skip identity checks to reach these rates.

Is MEXC's "Zero-Fee Spot" Claim True?

Partially, and the condition is the whole story. MEXC's own fee schedule sets the maker fee at 0% for spot trading, while the taker fee sits at 0.05%^††. "Zero-fee" only applies to the maker side of a trade — an order that adds liquidity by resting on the order book instead of filling instantly, such as a limit order placed away from the current price.

A market order, or a limit order that crosses the spread and fills right away, is a taker order. That side still costs 0.05% per trade no matter which exchange page markets the "zero fee" headline^†. If you place two market orders back to back — buy, then sell — you pay the 0.05% taker rate twice, not zero.

We could not verify from our knowledge graph whether MEXC's 0% maker fee^† applies to every trading pair, every account tier, or has any conditions attached beyond the regular tier. Check MEXC's current fee page directly (mexc.com, checked 2026-09-13) before assuming the zero-fee rate applies to the exact pair and order type you plan to use.

How Much Does a Small Trade Actually Cost You?

Here is a round-trip calculation with the assumptions stated up front: a $1,000 position, with both the entry and the exit filled as market (taker) orders, at each exchange's regular, non-discounted rate^†.

1. MEXC, both legs taker: 0.05% taker × 2 sides = 0.10% of $1,000 = $1.00^†
2. MEXC, both legs maker (limit orders that don't cross the spread): 0% × 2 sides = $0.00^†
3. Binance, regular rate: 0.10% taker × 2 sides = 0.20% of $1,000 = $2.00^†
4. Bybit, regular rate: 0.10% taker × 2 sides = 0.20% of $1,000 = $2.00^†

At this size, MEXC's all-taker round trip costs half of Binance's and Bybit's^†††, and the all-maker scenario costs nothing at all — but only if both orders genuinely add liquidity instead of filling immediately.

How Does the Cost Compare on a Larger Trade?

Same method, scaled up: a $5,000 position, full round trip, both legs filled as taker orders^†.

1. MEXC, regular rate: 0.10% of $5,000 = $5.00^†
2. Binance, regular rate: 0.20% of $5,000 = $10.00^†
3. Bybit, regular rate: 0.20% of $5,000 = $10.00^†

Our knowledge base's core risk rule caps what you put at stake on a single trade at 1% of the account, so on a $5,000 account that ceiling is $50 . MEXC's $5.00 round-trip fee eats a tenth of that budget before the market has moved at all, while Binance and Bybit's $10.00 fee eats a fifth^†††. The point of that rule isn't the fee itself — it's that a bigger unplanned cost, whatever the source, eats into the same fixed budget you set aside for the trade actually going wrong. Run your own position size through our fee calculator instead of assuming which exchange is cheapest for your trade.

What About MEXC Futures Fees?

We do not have verified futures maker/taker rates for MEXC, Binance, or Bybit in our knowledge graph, so we will not state a number here — not verified, see official fee page, checked 2026-09-13. Futures fee schedules are commonly structured differently from spot (separate maker/taker rates, funding rates, and sometimes VIP tiers based on futures volume specifically), so do not assume your spot fee rate carries over to a futures account on any of these three exchanges. Check each exchange's current futures fee page directly before opening a leveraged position.

Does MEXC Charge Withdrawal Fees?

Not verified in our data — see official fee page, checked 2026-09-13. Withdrawal fees are set per network and per asset, and they are not part of the maker/taker trading schedule discussed above. Check MEXC's current withdrawal fee page for the specific coin and network you plan to use before moving funds off the exchange, since these numbers change more often than trading fees.

Common Mistakes

1. Assuming "zero-fee spot" means every order is free. Only the maker side is 0%; taker orders still cost 0.05% on MEXC^††.
2. Placing market orders and expecting the maker rate. A market order always fills as taker, so it pays 0.05%, not 0%^†.
3. Comparing MEXC's spot rate to a competitor's futures rate. Spot and futures fee schedules are separate on all three exchanges, and we could not verify futures numbers for any of them.
4. Ignoring withdrawal costs entirely. These are not part of the trading fee schedule and are not verified in our data — check the current withdrawal page before you move funds.
5. Checking only one side of a round trip. A single order pays its fee once; a full buy-then-sell round trip pays it twice, which is why the worked examples above use two-sided math^†.

How Do You Lower Your MEXC Fee Bill?

1. Use limit orders placed away from the current price so they rest on the book as maker orders and qualify for the 0% rate, instead of market orders that always pay taker^†.
2. Accept that a limit order might not fill. The trade-off for a 0% maker fee is that your order sits unfilled if the price never reaches it — that's the cost of avoiding the 0.05% taker fee^††.
3. Run your real trade size through our fee calculator to see how the maker-vs-taker gap changes with position size, and compare it against Binance and Bybit directly.
4. Read our maker vs taker fees guide for the mechanics of which order types count as which, since that distinction is the entire "zero-fee" story on MEXC.
5. Cross-check the current schedule using our methodology before relying on any specific number, since exchanges revise fee schedules without much notice.

For a side-by-side beyond fees — coins listed, KYC process, and platform features — see our MEXC review, Binance vs MEXC comparison, and Bybit vs MEXC comparison. Our best low-fee exchanges list ranks exchanges across this same maker/taker method.

FAQ

Does MEXC really charge zero fees on every spot trade?

No. The 0% rate applies only to maker orders — limit orders that add liquidity to the book. Taker orders, including all market orders, still cost 0.05%^††.

Do I need to hold a specific token to get MEXC's lowest fee?

We do not have verified data confirming a token-holding discount program for MEXC in our knowledge graph. Check MEXC's current fee page directly (mexc.com, checked 2026-09-13) before assuming a discount applies.

Does MEXC's zero-maker-fee rate apply to futures trading too?

We could not verify this. Futures fee schedules are commonly set separately from spot on major exchanges, and we do not have confirmed MEXC futures maker/taker numbers — not verified, see official fee page, checked 2026-09-13.

See our best exchanges list for more comparisons, and read our affiliate disclosure for how we're funded.

RISK: Crypto assets are volatile and unregulated in many jurisdictions. Not financial advice.

Last updated: 2026-09-13